Panasonic PTAE8000 Operating Instructions - Page 72
[3D MOTION REMASTER], [3D SAFETY PRECAUTIONS], Blue gauge, Red gauge, Triangular, point, Blue display
View all Panasonic PTAE8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
[3D SETTINGS] menu The gauge display of the one-dimensional display on the parallax adjustment monitor of [Mode2] or [Mode3] indicates the following content: Blue gauge Displays the maximum screen parallax value of the into Red gauge Displays the maximum value of the in front of screen parallax Displays the peak of the parallax of the Triangular entire image during the last one second point (left side: In front of screen parallax, right side: Into screen parallax) MOVE DISPLAY ADJUSTƷƷENTER : APPLYƷƷDEFAULT : RESETƷƷFUNCTION : FREEZE This indicates the maximum estimate into screen parallax while measuring. Note zzIn [Mode2] and [Mode3], the display position can be moved left and right with the ◄ ► buttons. zzIn [Mode3], the detection level of the parallax can be changed with the button. Low level and high level can be switched by pressing the button each time. The default setting is high level. zz In the cases such as 3D video input has a very large parallax or in dark scenes, the correct parallax may not be detected. zzIf the depth of field effects in front of and into the screen for the 3D video parallax are set stronger than the target, this may cause some individuals to feel extreme discomfort or fatigue. Adjust the parallax so as to not exceed target displaying (white (solid line)). zzWhen an action is performed such as switching the power off and on, switching input, or switching the signal, the parallax adjustment set becomes inactive. zzWhen adjusting the parallax using the [3D VIEWING MONITOR], the ends on both sides of the video are masked. Also note that the aspect size is changed. Reference line Peak of the in front of screen parallax Peak of the into screen parallax This indicates the maximum estimate in front of screen parallax while measuring. * The illustration shown here depicts how an image is projected. The parallax distribution display on the parallax adjustment monitor in [Mode3] indicates the following content: Blue display Displays the into screen parallax Red display Displays the in front of screen parallax ADJUSTƷƷENTER : APPLYƷƷDEFAULT : RESETƷƷFUNCTION : CANCEL FREEZE * The illustration shown here depicts how an image is projected. zzThe [3D VIEWING MONITOR] is disabled during keystone correction. [3D MOTION REMASTER] During the display of 3D images, a smooth operation in which the continuity of parallax is maintained is realized. Switch settings Switch settings Settings MOVE DISPLAY SUB MENU : CHANGE SENSITIVITY ADJUSTƷƷENTER : APPLYƷƷDEFAULT : RESETƷƷFUNCTION : FREEZE HIGH SENSITIVITY * The illustration shown here depicts how an image is projected. 72 - ENGLISH [ON] [OFF] Active Inactive Note zz This function is only active for 3D input signals and is inactive for 3D video that has been converted from 2D to 3D. zz When [FRAME CREATION] is [OFF], [3D MOTION REMASTER] cannot be performed. [3D SAFETY PRECAUTIONS] A request message regarding 3D viewing is displayed.