Panasonic SAXR58 SAXR58 User Guide - Page 19
Digital signals this unit can play, Signal indicators, Dolby Digital including, Dolby Digital Surround
View all Panasonic SAXR58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Enjoying Home Theater features ENGLISH Digital signals this unit can play Dolby Digital (including These digital surround systems were developed by Dolby Laboratories. Dolby Dolby Digital Surround Digital Surround EX, with its additional surround back channels, produces an EX) increased sense of realism. DTS (including DTS-ES and DTS 96/24) These digital surround systems were developed by DTS (Digital Theater Systems, Inc.). DTS-ES, with its additional surround back channel, immerses you in sound. DTS 96/24 delivers multi-channel sound with superior fidelity (96 kHz/24 bit). PCM You can input PCM signals with sampling frequencies up to 192 kHz with the DIGITAL IN COAXIAL 1 terminal. The other digital terminals allow input of up to 96 kHz. The display shows the sampling frequency when you input 88.2-kHz, 96-kHz, 176.4-kHz, or 192-kHz signals. Note This unit cannot process Dolby Digital RF or MPEG audio signal. DVD etc. DVD etc. CD, DVDAudio etc. Signal indicators 2CH MIX TUNED SPEAKERS BI-WIRE AB MONO ST RDS PS PTY M SLEEP DIGITAL INPUT PCM cm DTS 96/24DTS-ES kHz DIGITAL EX EX MHz PLⅡx NEO:6 SFC DIGITAL: DIGITAL EX: EX: PLΙΙx: PLΙΙ: Dolby Digital sources Dolby Digital Surround EX decoder (while in Dolby Pro LogicΙΙx mode) when the input signal is Dolby Digital 5.1channel or Dolby Digital Surround EX and you are using one surround back speaker. Dolby Digital Surround EX decoder (while in Dolby Pro LogicΙΙx mode) when the input signal is DTS 5.1-channel and you are using one surround back speaker. Dolby Pro LogicΙΙx decoder Dolby Pro LogicΙΙ with stereo sources when you are not using a surround back speaker. DTS: DTS 96/24: DTS-ES: NEO:6: SFC: DTS sources DTS 96/24 sources DTS-ES Discrete 6.1 sources or when using the DTS-ES matrix DTS NEO:6 matrix Sound field control For your reference • Dolby Pro LogicΙΙx, NEO:6, and SFC add surround effects by "adding" channels, so if they are off, the unit plays the number of channels recorded in the original source. For example, if it is a 5.1-channel source, there will be no output from the surround back speakers. • The SURROUND mode turns off when input is 192-kHz PCM. • Whenever you switch to a different source, the following display appears to show you the number of channels. (It may not appear with some sources.) Subwoofer Surround and surround back channels Front and center channels 19 RQTV0156