Panasonic SAXR58 SAXR58 User Guide - Page 28

Receiver settings ENGLISH Receiver settings ➡ page 26 for basic operations AUTO ADVANCED SPEAKER SETUP DUAL AMP BI-AMP SPEAKERS A B SURROUND AUTO DETECTOR AUX S VIDEO IN VIDEO IN L AUDIO IN R TUNE SETUP MIC HDMI MENU SETUP INPUT SELECTOR RETURN ENTER VOLUME MENU SETUP INPUT SELECTOR RETURN ENTER Digital input settings 2a Select and confirm. • Change these settings to suit the connections you have made 2b Select the equipment and confirm. to the digital input terminals (➡ pages 6, 7, 9, and 10). • You cannot allocate more than one terminal per input. 3 Change the digital input setting and confirm. Therefore, if you change the setting for "DVD" to "OPT 1", digital input for DVD input will be only through the OPTICAL 1 Repeat 2b and 3 to change other settings. terminal. TV: DVR: DVD: CD: Television DVD recorder DVD player CD player Factory setting: TV: OPT1 (OPTICAL 1) DVR: OPT2 (OPTICAL 2) DVD: COAX1 (COAXIAL 1) CD: COAX2 (COAXIAL 2) Input signal • This unit automatically detects whether input is digital or analogue, but you can fix the input mode. • Select "AUTO" if it isn't necessary to fix a certain signal. 2a Select and confirm. 2b Select the equipment and confirm. TV: DVR: DVD: CD: Television DVD recorder DVD player CD player 3 Select the setting and confirm. Repeat 2b and 3 to change other settings. PCM FIX mode • In rare cases, the unit may have trouble recognizing the digital signals on discs. Use this mode if the beginnings of tracks are cut off when playing CDs. • Do not use this mode if the unit can handle audio from CDs normally. • When PCM FIX mode is on, the unit cannot process other signals. Choose another mode if PCM FIX causes noise. AUTO: ANALOG: DIG: PCMFIX: The unit automatically detects whether input is digital or analogue. (HDMI takes priority when input is digital.) Analogue input fixed Digital input fixed PCM (from CDs) digital input fixed Factory setting: TV, DVR, DVD, CD: AUTO For your reference • "DIGITAL INPUT" lights after fixing digital input. • "PCM" lights if you select the PCM FIX mode. • "PCM FIX" flashes on the display if you input any signal other than PCM after you have set the PCM FIX mode. Balance Bi-amp settings 2 Select and confirm. • This option appears after you have set "LR BI-WIRE setting" to "YES" (➡ page 27). • Adjust high frequency (HF) and low frequency (LF) balance. • Correct HF and LF delay time. 2a Select and confirm. 3 Adjust and confirm. Use the bar as a guide. LF: low frequency HF: high frequency 28 RQTV0156 Delay time Speaker (cross section of a speaker) Difference 2 Select and confirm. 2a Select and confirm. 3 Adjust and confirm. cm Adjustment range: 0 to 30 cm Adjust in 1-cm increments. Factory setting: 0 cm