Panasonic SAXR58 SAXR58 User Guide - Page 38
Reference, Specifications (din 45 500), Help Messages
View all Panasonic SAXR58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Specifications (DIN 45 500) Specifications/Help messages ENGLISH AMPLIFIER SECTION Power output (at AC 230 to 240 V) DIN 1 kHz (T.H.D. 1 %) 2 x 100 W (6 Ω) 20 Hz to 20 kHz continuous power output both channel driven 2 x 80 W (6 Ω) Total harmonic distortion rated power at 20 Hz to 20 kHz 0.09 % (6 Ω) Power bandwidth both channel driven, -3 dB 4 Hz to 88 kHz (6 Ω, 0.9 %) Power output each channel driven (at AC 230 to 240 V) DIN 1 kHz (T.H.D. 1 %) Front (L/R) 100 W (6 Ω) Center 100 W (6 Ω) Surround (L/R) 100 W (6 Ω) Surround Back (L/R) 100 W (6 Ω) Load impedance Front (L/R) A or B 6 Ω to 16 Ω A and B 6 Ω to 16 Ω BI-WIRE 6 Ω to 16 Ω Center 6 Ω to 16 Ω Surround (L/R) 6 Ω to 16 Ω Surround Back (L/R) 6 Ω to 16 Ω Frequency response CD, DVD, DVD Recorder, VCR, TV/STB, AUX 4 Hz to 88 kHz, ±3 dB DVD 6CH 4 Hz to 44 kHz, ±3 dB Input sensitivity and impedance CD, DVD/DVD 6CH, DVD Recorder, VCR, TV/STB, AUX 200 mV/22 kΩ S/N at rated power (6 Ω) CD, TV/STB, DVD, DVD Recorder (Digital input) 90 dB (IHF, A: 103 dB) Tone controls BASS 50 Hz, +10 dB to -10 dB TREBLE 20 kHz, +10 dB to -10 dB Channel balance (250 Hz to 6.3 kHz) ±1 dB Channel separation 55 dB Subwoofer frequency response (-6 dB) 7 Hz to 200 Hz Digital input (OPTICAL) 2 (COAXIAL) 2 HDMI (Version 1.2a) Input 1 Output 1 FM TUNER SECTION Frequency range Sensitivity S/N 30 dB S/N 26 dB S/N 20 dB IHF usable sensitivity (IHF '58) IHF 46 dB stereo quieting sensitivity 87.50 MHz to 108.00 MHz 1.5 µV/75 Ω 1.3 µV/75 Ω 1.2 µV/75 Ω 1.5 µV/75 Ω 22 µV/75 Ω Help messages Total harmonic distortion MONO 0.2 % STEREO 0.3 % S/N MONO 60 dB STEREO 58 dB Frequency response 20 Hz to 15 kHz, +1 dB, -2 dB Alternate channel selectivity ±400 kHz, 65 dB Capture ratio 1.5 dB Image rejection at 98 MHz 40 dB IF rejection at 98 MHz 70 dB Spurious response rejection at 98 MHz 70 dB AM suppression 50 dB Stereo separation 40 dB Carrier leak 19 kHz, -30 dB 38 kHz, -50 dB Channel balance (250 Hz to 6.3 kHz) ±1.5 dB Limiting point 1.2 µV Bandwidth IF amplifier 180 kHz FM demodulator 1000 kHz Antenna terminal 75 Ω (unbalanced) AM TUNER SECTION Frequency range 522 kHz to 1611 kHz (9 kHz steps) 530 kHz to 1620 kHz (10 kHz steps) Sensitivity 20 µV, 330 µV/m Selectivity (at 999 kHz) 55 dB IF rejection (at 999 kHz) 50 dB VIDEO SECTION Output voltage at 1 V input (unbalanced) 1± 0.1 Vp-p Maximum input voltage 1.5 Vp-p Input/output impedance 75 Ω (unbalanced) S-Video Input DVD, DVD Recorder, TV/STB Output TV MONITOR Component Video Input DVD Recorder, TV/STB Output TV MONITOR GENERAL Power supply AC 230 to 240 V, 50 Hz Power consumption 140 W Dimensions (W x H x D) 430 mm x 107.5 mm x 390 mm Mass 4.7 kg Power consumption in standby mode: Power consumption in HDMI off mode: 0.9 W 0.35 W Notes: 1. Specifications are subject to change without notice. 2. Mass and dimensions are approximate. 3. Total harmonic distortion is measured by the digital spectrum analyzer. Message (flashing) 38 RQTV0156 Causes and solutions Muting is on. Press [MUTING] on the remote control to cancel (➡ page 31). You are trying to use a feature that is available only in "MUSIC" mode. Change the mode to "MUSIC" (➡ pages 22 to 23). Center and surround speakers are not connected, or they are set as absent. Connect the speakers (➡ page 13) or change their setting to present (➡ page 27). Surround and surround back speakers are not connected, or they are set as absent. Connect the speakers (➡ page 13) or change their setting to present (➡ page 27). Surround back speakers are not connected, or they are set as absent. Connect the speakers (➡ page 13) or change their setting to present (➡ page 27). You are trying to use an effect unavailable with DTS-ES sources. You are trying to use an effect unavailable with DVD-Audio sources. You are trying to use an effect unavailable with DVD analogue 6-channel input. You are trying to use an effect unavailable with the current input source. You have set the "PCM FIX" mode. Cancel this mode (➡ page 28). SPEAKERS A is off. Press [SPEAKERS A] to turn on "SPEAKERS A" (➡ page 18). SPEAKERS A and SPEAKERS B are off. Select one of the speakers (➡ page 18).