Panasonic TH-50PX600 Operating Instructions - Page 5

Accessories/Options Preventing the plasma television from falling over * The plasma TV must be fastened to both the base and the wall. For 42'' Plasma television Accessories for pedestal security 1 Band (1) 2 Screw (3) 3 Wood screw (1) 4 Clamp (2) ■Securing to a base Nominal diameter 4 mm x 10 screw 2 ■Securing to a wall Wall screw 2 D Wood screw 3 Band 1 Fasten with wood screws in the holes in the back edge of the wood worktop. If there are no holes, first drill them in the middle of the thickness of the wood worktop, and then fasten the strap with wood screws. Clamp 4 * Use strong wire or chain which is commercially available to secure the plasma television to a solid area of the wall or a pillar. For 50'' Plasma television Accessories for pedestal security 1 Band (2) 2 Screw (2) 3 Wood screw (2) 4 Clamp (2) ■Securing to a base Nominal diameter 4 mm x 12 ■Securing to a wall Clamp Front * Remove the screws at both top corners on the rear side of the plasma TV, and attach the clamps 4 to the plasma TV using the removed screws. Screw Wood Worktop D Band Screws on main body • Securing method Clamp * Use strong wire or chain which is commercially available to secure the plasma television to a solid area of the wall or a pillar. Wood Screw Fasten with wood screws in the holes in the back edge of the wood worktop. If there are no holes, first drill them in the middle of the thickness of the wood worktop, and then fasten the strap with wood screws. 8 For 58'' Plasma television Accessories for pedestal security 1 Band (3) 2 Screw (3) 3 Wood screw (3) 4 Hook (2) 5 Hook securing screw (2) Nominal diameter 4 mm x 12 M8 x 35 ■Securing to a base ■Securing to a wall Hook Screw D Band Wood screw Fasten with wood screws in the holes in the back edge of the wood worktop. If there are no holes, first drill them in the middle of the thickness of the wood worktop, and then fasten the strap with wood screws. Hook securing screw 5 • Securing method Hook * Use a flat-head screwdriver to remove the caps at the left and right top on the rear side of the plasma TV, and attach the hooks 4 to the plasma TV using the hook securing screws 5 . (Keep the caps you have removed in a safe place.) * Use a strong wire or chain which is commercially available to secure the hooks 4 to a solid area of the wall or pillar. 9 Quick Start Guide Accessories/Options