Panasonic VDRM30 VDRM30 User Guide - Page 158
During recording, Symptom, Cause and Correction, Reference
View all Panasonic VDRM30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
During recording Symptom Cause and Correction Pressing the REC button Is input image copy-guarded? will not start recording. Copy-guarded image cannot be recorded on this DVD Palmcorder. Recording starts but stops immediately. Is disc scratched or does dirt or fingerprints adhere to it? Clean the disc. If there is still no improvement, replace the disc. Is some other AV device directly connected to the video/audio input/ output jack of this DVD Palmcorder? If the AV device is connected via several other devices, such as AV selector, the video signal may not be transmitted incorrectly. In such a case, reduce the number of devices through which the video signal is transmitted, or connect AV device directly. Are you attempting to record an image from a video game or PC? From some video games or PCs, images cannot be recorded on this DVD Palmcorder. LCD screen is hard to Has brightness of LCD screen been adjusted? see. Stop recording and adjust the brightness. Is the DVD Palmcorder being used outdoors? Use the viewfinder. When using LCD monitor, adjust its angle so that LCD screen is not exposed to direct sunlight. Focus is not correct. Is it difficult to use auto focus with your subject? Focus manually. Does "MF" appear? The DVD Palmcorder is set to manual focus. Focus the subject manually, or release manual focus. Is the diopter control correctly adjusted if you are using the viewfinder as a monitor? Adjust the diopter control. In cases other than the above, set the power switch to "POWER OFF", and then set it to " VIDEO", " PHOTO" or " PHOTO" again. Some vibrations are felt These vibrations or sound are caused by disc drive: This does not or slight sound is heard indicate a fault. from mechanism. Reference page 68 78 67 68 93 47, 49 60 59 48 47 158