Panasonic VDRM30 VDRM30 User Guide - Page 86

Magnifying Subject Image (Dig. Zoom) When the zoom lever is moved down to "T" control side with Dig. Zoom 40× or 240× specified, digital zoom will automatically kick in when optical 10× zoom range is exceeded. You can set the digital zoom to 40× or 240× for movie recording, or 40× for still recording. 1 Press the MENU button, choose "Dig. Zoom" on the "Camera Functions Setup" menu screen, and then press the button. Came ra Func t i ons Set u p P r o g r am AE Wh i t e Ba l . EIS Di g . Zoom 240x Wi nd Cut 40x Of f ENTER RETURN RAM 2 Choose the desired magnification, and then press the button. 3 Press the MENU button to end the setting. Moving the zoom lever will display the digital zoom bar. 0:00:00 REM 3 0 MIN FINE 8 : 00AM SEP 30 2 00 3 When Dig. Zoom is "Off" W T When Dig. Zoom is "On"(40x) W T Digital zoom range When Dig. Zoom is "On"(240x) (only in movie recording) W T Digital zoom range Dig. Zoom "240×", "40×" or "Off" setting will be stored in memory even if the DVD Palmcorder is turned off. Note: • You can check whether Dig. Zoom is "240×", "40×" or "Off" by pressing the DISPLAY button and reviewing the on-screen information. • You can also use the DIGITAL ZOOM button on remote controller to switch the digital zoom setting: Pressing the button during movie recording will switch the setting between "Off", "40×" and "240×": Pressing the button during still recording will switch between "Off" and "40×". • When using card, zooming only up to 40× is possible, even when "240×" or "40×" has been chosen. • If the power switch is set to " PHOTO" with DVD-RAM disc loaded, zooming only up to 40x is possible, even when "240×" has been chosen. 86