Panasonic WVNW474S WVNW474S User Guide - Page 14
Waterproof Process, Connector junctions
View all Panasonic WVNW474S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3. Zoom • Unlock the zoom lever. • Move the lever to adjust the zoom. • Lock the lever. • Gaps and holes Apply such a waterproof material as silicone clay (rubber) to the screws, screw holes, and other relevant portions. Focus lock lever Zoom lock lever NEAR FAR WIDE TELE 4. Focus • Unlock the focus lever. • Move the lever to adjust the focus. • Lock the lever. 5. Reinstalling the dome cover • Attach the dome cover to the camera so that the two position marks match. • Tighten the three tamper-proof screws. ● Waterproof Process If necessary, apply waterproof process to protect the camera from water soak. • Power cord Tape individual wires first, and finally all of them as a whole. Power cord • Connector junctions Tape the junction points of BNC-BNC, control connector-adapter, and network connector-adapter. Video output cable -14-