Panasonic WVNW474S WVNW474S User Guide - Page 23

SETTING PROCEDURES The following pages describe setting operations from the camera. For accessing from the PC, interpret these instructions as follows. Function Opening the camera setup menu Closing the camera setup menu From the Camera From the PC Hold down the [SET] button for 2 seconds. Click the Camera Setup button in the main page to display the menu control buttons. Click the [MENU ON] button. Press the [SET] button while the cursor is Click the [MENU OFF] button. at END. Opening a more detailed setup menu Press the [SET] button while the cursor is Click the [SET] button while the cursor is at an item tailed with O mark. at the item tailed with O mark. Returning to the previous menu Press the [SET] button while the cursor is Click the [SET] button while the cursor is at RET. at RET or simply clock the [ESC] button. Opening the special menu Resetting the parameter of an item Resetting all the settings Selecting an item Selecting a parameter Validating the selection Escaping from the VMD mask setup etc. Hold down the [Left] and [Right] buttons simultaneously while the cursor is at END in CAM SETUP. Hold down the [Left] and [Right] buttons simultaneously while the cursor is at the item. Hold down the [Left], [Right], and [SET] buttons simultaneously while the cursor is at CAMERA RESET. Press the [Up] or [Down] button. Press the [Left] and [Right] button. Press the [SET] button. Hold down the [SET] button for 2 seconds. Click the [RESET/SPECIAL] button while the cursor is at END in CAM SETUP. Click the [RESET/SPECIAL] button while the cursor is at the item. Click the [ALL RESET] button while the cursor is at CAMERA RESET. Click the [D] or [C] button. Click the [A] or [B] button. Click the [SET] button. Click the [ESC] button. ■ Setup Selection ** SET UP ** CAMERA ↵ ↵ NETWORK END SET UP DISABLE ■ Camera Setup Menu (CAM SETUP) ** CAM SET UP ** ↵↵ CAMERA ID OFF ALC ALC SHUTTER --- AGC ON(DNR-H) SENS UP OFF SYNC INT ↵ WHITE BAL ATW1 MOTION DET OFF MENU RET END 1. Move the cursor to CAMERA or NETWORK, and press [SET] to open the desired setup menu. CAMERAN: Opens the CAMERA SETUP menu. NETWORKN: Opens the NETWORK SETUP menu. 2. Move the cursor to END, and press [SET] to return to camera image screen. Note: When SETUP DISABLE appears in the bottom line you cannot change the currently active settings. This disablement is designed to prevent accidental setting change. Refer to the previous page to change it to ENABLE. 1. Camera Identification (CAMERA ID) Setting You can assign a name to the camera. The camera ID consists of up to 16 alphanumeric characters. The camera ID display can be switched on and off on the monitor screen. Character Cursor Cursor 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ SPACE POSI RET END RESET Character Area Command Editing Area CAMERA ID menu -23-