Panasonic WVSC385 WVSC385 User Guide - Page 10

the MPEG-4 Visual Standard MPEG-4 Video and/or ii, About SDHC/SD memory card - pdf

Page 10 highlights

Do not touch the transparent part (over the lens) with your bare hands. The dirty part causes deterioration of picture quality. Handle this product with care. Do not drop this product, nor apply shock or vibration to the product. Failure to observe this may cause trouble. About the PC monitor When displaying the same image on the monitor for a long time, the monitor may be damaged. It is recommended to use a screen-saver. When an error is detected, this product will restart automatically. This product will be inoperable for around 2 minutes after the restart just as when the power is turned on. Product disposal/transfer Images saved on the SDHC/SD memory card may lead to personal information leakage. When it is necessary to dispose or give this product to someone, even when for repair, make sure that there is no data on the hard disk drives. Cleaning this product body Be sure to turn off the power before cleaning. Failure to observe this may cause injury. Do not use strong abrasive detergent when cleaning this product. Otherwise, it may cause discoloration. When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product. When the dirt is hard to remove, use a mild detergent and wipe gently. Then, wipe off the remaining detergent with a dry cloth. Important: • The camera position may be moved inadvertently while cleaning the camera body. Restart the camera or refresh the camera position (position refresh) to correct the camera position. Refer to the Operating Instructions (PDF) for further information. Transmission interval Image transmission interval may become slow depending on the network environment, PC performance, shooting subject, access number, etc. About SDHC/SD memory card • Before inserting the SDHC/SD memory card, turn off the power of this product first. Otherwise, it may cause malfunction or damage data recorded on the SDHC/SD memory card. Refer to pages 24 and 25 for descriptions of how to insert/remove an SDHC/SD memory card. • When using an unformatted SDHC/SD memory card, format it using this product. Recorded data on the SDHC/SD memory card will be deleted when formatted. If an unformatted SDHC/SD memory card or an SDHC/SD memory card formatted with other devices is used, this product may not work properly or performance deterioration may be caused. Refer to the Operating Instructions (PDF) for how to format a SDHC/SD memory card. • When some SDHC/SD memory cards are used with this product, the product may not work properly or performance deterioration may be caused. Use the SDHC/SD memory cards recommended in page 33. Code label The code labels (accessory) are required at inquiry for trouble. Use caution not to lose these labels. It is recommended to paste one of the labels onto the CD-ROM case. About the MOS image sensor • When continuously shooting a bright light source such as a spotlight, the color filter of the MOS image sensor may have deteriorated and it may cause discoloration. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discoloration may remain. • When shooting fast-moving subjects or performing panning/tilting operations, objects crossing the shooting area may look to be bending askew. Position refresh During the use for a long period of time, the preset positions may become inaccurate. When "Position refresh" is set for the created schedule, the camera position will be corrected periodically. Refer to the Operating Instructions (PDF) for how to perform the settings. MPEG-4 Visual Patent Portfolio License This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial use of a consumer for (i) encoding video in compliance with the MPEG-4 Visual Standard ("MPEG-4 Video") and/or (ii) decoding MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 Video. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses and licensing may be obtained from MPEG LA, LLC. See http://www.mpegla.com. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Do not touch the transparent part (over the lens)
with your bare hands.
The dirty part causes deterioration of picture quality.
Handle this product with care.
Do not drop this product, nor apply shock or vibration to
the product. Failure to observe this may cause trouble.
About the PC monitor
When displaying the same image on the monitor for a long
time, the monitor may be damaged.
It is recommended to use a screen-saver.
When an error is detected, this product will restart
automatically.
This product will be inoperable for around 2 minutes after
the restart just as when the power is turned on.
Product disposal/transfer
Images saved on the SDHC/SD memory card may lead to
personal information leakage. When it is necessary to dis-
pose or give this product to someone, even when for
repair, make sure that there is no data on the hard disk
drives.
Cleaning this product body
Be sure to turn off the power before cleaning. Failure to
observe this may cause injury. Do not use strong abrasive
detergent when cleaning this product. Otherwise, it may
cause discoloration. When using a chemical cloth for
cleaning, read the caution provided with the chemical
cloth product.
When the dirt is hard to remove, use a mild deter-
gent and wipe gently.
Then, wipe off the remaining detergent with a dry cloth.
Important:
• The camera position may be moved inadvertently
while cleaning the camera body. Restart the camera
or refresh the camera position (position refresh) to
correct the camera position. Refer to the Operating
Instructions (PDF) for further information.
Transmission interval
Image transmission interval may become slow depending
on the network environment, PC performance, shooting
subject, access number, etc.
About SDHC/SD memory card
• Before inserting the SDHC/SD memory card, turn off
the power of this product first. Otherwise, it may
cause malfunction or damage data recorded on the
SDHC/SD memory card. Refer to pages 24 and 25
for descriptions of how to insert/remove an SDHC/SD
memory card.
• When using an unformatted SDHC/SD memory card,
format it using this product. Recorded data on the
SDHC/SD memory card will be deleted when format-
ted. If an unformatted SDHC/SD memory card or an
SDHC/SD memory card formatted with other devices
is used, this product may not work properly or perfor-
mance deterioration may be caused. Refer to the
Operating Instructions (PDF) for how to format a
SDHC/SD memory card.
• When some SDHC/SD memory cards are used with
this product, the product may not work properly or
performance deterioration may be caused. Use the
SDHC/SD memory cards recommended in page 33.
Code label
The code labels (accessory) are required at inquiry for
trouble. Use caution not to lose these labels. It is recom-
mended to paste one of the labels onto the CD-ROM
case.
About the MOS image sensor
• When continuously shooting a bright light source such
as a spotlight, the color filter of the MOS image sen-
sor may have deteriorated and it may cause discolor-
ation. Even when changing the fixed shooting direc-
tion after continuously shooting a spotlight for a cer-
tain period, the discoloration may remain.
• When shooting fast-moving subjects or performing
panning/tilting operations, objects crossing the shoot-
ing area may look to be bending askew.
Position refresh
During the use for a long period of time, the preset posi-
tions may become inaccurate. When "Position refresh" is
set for the created schedule, the camera position will be
corrected periodically.
Refer to the Operating Instructions (PDF) for how to per-
form the settings.
MPEG-4 Visual Patent Portfolio License
This product is licensed under the MPEG-4 Visual Patent
Portfolio License for the personal and non-commercial use
of a consumer for (i) encoding video in compliance with
the MPEG-4 Visual Standard ("MPEG-4 Video") and/or (ii)
decoding MPEG-4 Video that was encoded by a con-
sumer engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed by
MPEG LA to provide MPEG-4 Video. No license is granted
or shall be implied for any other use. Additional informa-
tion including that relating to promotional, internal and
commercial uses and licensing may be obtained from
MPEG LA, LLC.
10