Panasonic WVSC385 WVSC385 User Guide - Page 29
Symptom, Cause/solution, Reference, s, Live indicator keeps on, blinking orange approx. in 2
View all Panasonic WVSC385 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Symptom Cause/solution • UPnPTM error has occurred since the power is not supplied to the router. Turn on the power of the router. Wait until the connections are established. Live indicator keeps on blinking orange approx. in 2 seconds intervals. • An error has occurred during the port update by the UPnPTM function. • If the router in use does not support the UPnPTM function, perform the port forwarding setting for the router. In addition, deactivate the setting of auto port forwarding for the camera. • UPnPTM function of the router is disabled. Refer to the operating instructions of the router to enable the UPnPTM function. • Is "Off" selected for "Link/Access LED" on the "Basic" page? Live indicator never lights up. Select "On" or "On(Access)" for the indicator setting. Live indicator keeps on blinking red. Live indicator lights red. • The camera may be out of order. Contact your dealer. • Refer to the readme file on the provided CD-ROM for further information after checking the displayed contents of the "Maintenance" page - the [Status] tab - "Self check" of the setup menu. • Isn't the write protect switch of the inserted SDHC/SD memory card set to "LOCK"? Unlock the write protect switch of the SDHC/SD memory card. • Hasn't the inserted SDHC/SD card been formatted on a PC? Use an SDHC/SD memory card formatted on the camera. Or install the software to format the SDHC/SD memory card on the PC. Refer to our website (http://panasonic.net/pcc/support/ netwkcam/support/info.html) for further information about the supported software. • Isn't the inserted SDHC/SD memory card faulty? Replace the card with a normal one. Reference pages − Operating Instructions (PDF) − Operating Instructions (PDF) − Operating Instructions (PDF) 29