Pantech Hotshot Manual - English - Page 12

USING A microSDTM CARD A microSDTM card stores sounds, videos, images, photos, music, and other files. A 2GB microSDTM card comes pre-installed in your phone. INSTALLING A microSDTM CARD To install your microSDTM card: 1. Remove the battery cover and the battery. 2. Press the microSDTM card into the slot with the gold contacts facing down. 3. Replace the battery and the battery cover. To prevent possible damages, please keep the microSDTM card slot closed at all times regardless of whether a microSDTM card is inserted or not. REMOVING A microSDTM CARD To remove the microSDTM card: 1. Remove the battery cover and the battery. 2. Gently pull the exposed edge of the microSDTM card with your fingertip to release it from the slot. 3. Remove the microSDTM card. 4. Replace the battery and the battery cover. To ensure the proper function of removable memory, please use a microSDTM card. 20 BATTERY HANDLING INFORMATION DO'S • Only use the battery and charger approved for use with the HotshotTM. • Only use the battery for the system for which it is specified. 01 • Only use or replace the battery with a charging system or another battery that has been qualified with the system per this standard, IEEE-Std-1725-2006. Use of an unqualified battery or charger may present a risk of 02 fire, explosion, leakage, or other hazard. • Only use the battery for its original purpose. As an improper battery use may result in a fire, explosion or 03 other hazard. 04 • Try to keep batteries in a temperature between 41°F (5°C) and 95°F (35°C). If the battery is stored in temperatures above or below the recommended range, give it time to warm up or cool down before using. 05 • Store the discharged battery in a cool, dark, and dry place. • Purchase a new battery when its operating time gradually decreases after fully charging. 06 • Properly and promptly dispose of the battery according to local laws. • Battery usage by children should be supervised. 07 DON'TS 08 • Don't attempt to disassemble or open the battery - it is a sealed unit with no serviceable parts. • Don't crush, bend or deform, puncture or shred the battery. • Don't drop the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. • Don't leave the battery in extremely hot or cold temperatures. Otherwise, it could significantly reduce the capacity and lifetime of the battery. • Don't modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. • Don't accidentally short-circuit the battery by carrying it in your pocket or purse with other metallic objects such as coins, clips and pens. This may critically damage the battery. • Don't short-circuit a battery or allow metallic conductive objects to contact battery terminals. • Don't dispose of the battery by placing into a fire. 21