Philips S800 User Manual - Page 6
Switch on the phone, Charge the battery - codes
View all Philips S800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
S800_EN.book Page 5 Friday, February 10, 2006 6:46 PM Switch on the phone To switch on the phone, long press ) key. Enter the PIN code if required. The PIN code is a 4- to 8digit secret code of your SIM card. It is preconfigured and communicated to you by your operator or retailer. For more information on PIN codes, see "Security Setup". If you enter an incorrect PIN code three times in succession, your SIM card will be locked. To unlock it, you must obtain the PUK code from your network operator. Charge the battery Your phone is powered by a rechargeable battery. A new battery is partially charged and the phone will emit an audible alert to warn you when the battery level reaches low. Charging with the travel charger Plug the charger into the charger connector at the bottom of the phone and ensure that the arrow symbol on the charger is facing upwards as shown below. Then plug the other end of the charger into an AC power socket. The battery symbol indicates the state of charge. The charge indicators will scroll when the battery is Getting Started charging. The battery is fully charged when the charge indicators stop scrolling. You can then disconnect the charger. Keeping the charger plugged to the mobile phone when the battery is fully charged will not damage the battery. The only way to disconnect the charger is to unplug it, so use an easily accessible AC power socket. If you are not using your phone for a period of time, we recommend that you remove the battery. You can use your phone while it is charging. When the battery is completely discharged, the charge indicators will appear only after a few minutes of charging. 5