Philips VOIP8411B User manual - Page 33
Country Code
UPC - 609585128354
View all Philips VOIP8411B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
8.6 Extra features Discover and explore the additional features your phone offers! Find out how these features can benefit you and help you make the most from your phone. 8.6.1 Keypad lock You can lock the keypad to prevent accidental presses on the handset while you are carrying it around. Lock the keypad In idle mode: Press and hold . • The keypad is locked, and is displayed. Unlock the keypad In idle mode: 1 Press Unlock . • Press * to unlock? is displayed. 2 Press to unlock. • The keypad is unlocked. 8.6.2 Search missing handset(s) In idle mode: 1 Press on the base unit. • All the handsets connected to this base unit ring. 2 Press on the base unit again to stop paging. • All the handsets stop ringing. OR 2 Press any key on the handset to stop the paging of that handset. 8.7 System settings 8.7.1 Set your country code The country setting of your phone has been set during the initial set up of your phone. You can make changes to the country code on your phone. The country code is the international calling code for a country (example, "1" for Canada), see"Country codes list", page 35. Please refer to glossary for details about country code, see page 40. In idle mode: 1 Press Menu . 2 Scroll to Settings. Press Select . 3 Scroll to Call Settings. Press Select . 4 Scroll to Country Code. Press OK . 5 Edit the country code. Use Clear to make corrections. 6 Press OK . • The new setting is saved. ! Warning The phone may not work properly without correct country code entry. Note After country set up, your handset's power switches off. It will switch back on in a few seconds after updating the country settings. 8.7.2 Register your handset(s) with additional base This section shows you how to register your handset to additional base unit(s). If your handset displays Unregistered, refer to "Register the handset", page 12. In idle mode: 1 Press Menu . 2 Scroll to Settings. Press Select . 3 Scroll to Handset. Press Select . 4 Scroll to Register. Press Select . 5 Enter the system PIN (Default: 0000). Use Clear to make corrections. 6 Press Enter to confirm. • Your handset starts searching for the base. 7 Press on the base unit until the two indicators start blinking. Note Each handset can register up to 4 base units. After registering to 4 base units, your handset registration memory is full. 8.7.3 Select a base unit You can switch your handset between different base units if your handset has registered to these base units. For your convenience, you can Settings 31