Pioneer AXM-P8000 Owner's Manual - Page 23

Digital Signal Processor Section 07 English Operating the DSP details menu 123 456 1 Front left speaker 2 Center speaker 3 Front right speaker 4 Rear left speaker 5 Subwoofer 6 Rear right speaker % Press p and hold until SP Set appears in the display, then press p to display the DSP function names. After SP Set is displayed, press p repeatedly, the following DSP functions appear in the display: SP Set (speaker setting)C.Over (cross-over frequency)SP Lev (speaker output level) T Tone (test tone)TA MODE (time alignment mode)Time A (time alignment adjustment)AUTO EQ (auto-equalizer on/off) PEQ (3-band parametric equalizer) # When neither F/L nor F/R is selected in Posi, you cannot switch to Time A. # When neither CUSTOM1 nor CUSTOM2 is selected as an equalizer curve, you cannot switch to PEQ. # To return to the display of each source, press BAND. Using the sound field control The SFC function creates the sensation of a live performance. ! The acoustics of different performance en- vironments are not the same and depend on the extent and contour of space through which sound waves move and on how sounds bounce off the stage, walls, floors and ceilings. At a live performance you hear music in three stages: direct sound, early reflections, and late reflections, or reverberations. Those factors are programed into the SFC circuitry to recreate the acoustics of various performance settings. % Press SFC to select the desired SFC mode. Press SFC repeatedly to switch between the following mode: Musical (musical)Drama (drama)Action (action)Jazz (jazz)Hall (hall)Club (club) OFF (off) Note If the source is a 2-channel LPCM audio or a 2channel Dolby Digital audio and you select SFC effects that are most applicable for 5.1-channel audio (i.e., Musical, Drama or Action), we recommend turning Dolby Pro Logic B on. On the other hand, when selecting SFC effects that are intended for use with 2-channel audio (i.e., Jazz, Hall or Club), we recommend turning Dolby Pro Logic B off. En 23