Pioneer AXM-P8000 Owner's Manual - Page 36
Adjusting the brightness, Correcting distorted sound, Switching the sound, muting/attenuation
UPC - 012562693538
View all Pioneer AXM-P8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 08 Initial Settings Adjusting the brightness You can adjust the display brightness. Initially this mode is set to 12. 1 Press o to select Brightness. Press o repeatedly until Brightness appears in the display. 2 Press m or n to adjust the brightness level. Each press of m or n increases or decreases the brightness level. 0 15 is displayed as the level is increased or decreased. Correcting distorted sound You can minimize distortion that may be caused by the equalizer curve settings. ! Setting an equalizer level high can cause distortion. If high sound is crippled or distorted, try switching to Low. Normally, leave the setting at High to ensure quality sound. 1 Press o to select Digital ATT. Press o repeatedly until Digital ATT appears in the display. 2 Press m or n to select Low or High. Pressing m or n will switch between High (high) and Low (low) and that status will be displayed. Switching the sound muting/attenuation Sound from this system is muted, attenuated or mixed automatically in the following cases: ! When a call is made or received using a cellular telephone connected to this unit. ! When the voice guidance is output from a Pioneer navigation unit connected to this unit. 1 Press o to select Tel/Navi. Press o repeatedly until Tel/Navi appears in the display. 2 Press m or n to switch the telephone muting/attenuation. Press m or n until the desired setting appears in the display. ! Tel/Navi :MUTE Muting ! Tel/Navi :ATT2 Attenuation (Tel/Navi :ATT2 has a stronger effect than Tel/Navi :ATT1) ! Tel/Navi :ATT1 Attenuation Notes ! The sound is turned off, MUTE or ATT is displayed and no audio adjustment is possible. ! Operation returns to normal when the phone connection is ended. Switching the auxiliary setting It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. 1 Press o to select AUX. Press o repeatedly until AUX appears in the display. 2 Press r to turn auxiliary setting on. AUX :ON appears in the display. # To turn auxiliary setting off, press q. 36 En