Pioneer AXM-P8000 Owner's Manual - Page 33
Adjusting 3-band parametric, equalizer, 100Hz, 125Hz, 315Hz, 630Hz
UPC - 012562693538
View all Pioneer AXM-P8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Digital Signal Processor Section 07 English Display VOCAL FLAT CUSTOM1 CUSTOM2 Equalizer curve Vocal Flat Custom 1 Custom 2 ! CUSTOM1 and CUSTOM2 are adjusted equalizer curves. ! When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. % Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: SUPER BASSPOWERFULNATURAL VOCALFLATCUSTOM1CUSTOM2 Adjusting 3-band parametric equalizer For CUSTOM1 and CUSTOM2 equalizer curves, you can adjust the front, rear and center equalizer curves separately by selecting a center frequency, an equalizer level and a Q factor for each band. ! A separate CUSTOM1 curve can be cre- ated for each source. ! A CUSTOM2 curve can be created com- mon to all sources. ! The center speaker largely determines the sound image and getting the balance right isnt easy. We recommend reproducing a 2ch. audio (a CD for example) and getting the balance right among the speakers except for the center, and then reproducing a 5.1-ch. audio (Dolby Digital or DTS) and adjusting the center speaker output to the balance you have already got among the other speakers. 1 Press p and hold until SP Set appears in the display, then press p to select PEQ. After SP Set is displayed, press p until PEQ appears in the display. 2 Press m or n to select the desired item. Each press of m or n selects the item in the following order: FRONT (speakers)Low (bands)Low (center frequency)L (equalizer level)Q.WIDE (Q factor) 3 Press q or r to select the speaker to be adjusted. Each press of q or r selects the speaker in the following order: FRONT (front speakers)CENTER (center speaker)REAR (rear speakers) # You cannot select speakers whose size is set at OFF. 4 Press n and then press q or r to select the equalizer band to be adjusted. Each press of q or r selects equalizer bands in the following order: Low (low)Mid (mid)High (high) 5 Press n and then press q or r to select the center frequency of selected band. Each press of q or r selects the frequency in the following order: 40Hz50Hz63Hz80Hz100Hz125Hz 160Hz200Hz250Hz315Hz400Hz 500Hz630Hz800Hz1kHz1.25kHz 1.6kHz2kHz2.5kHz3.15kHz4kHz 5kHz6.3kHz8kHz10kHz12.5kHz 6 Press n and then press q or r to adjust the equalizer level. Each press of q or r increases or decreases the equalizer level. +6 6 is displayed as the level is increased or decreased. En 33