Pioneer CD-BTB200 Owners Manual - Page 37
Installing this unit, Installing the microphone, Installation, Mounting with Velcro fasteners
View all Pioneer CD-BTB200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installation Section 07 English Important ! Check all connections and systems before final installation. ! Do not use unauthorized parts. The use of unauthorized parts may cause malfunctions. ! Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle. ! Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop. ! When installing this unit, be sure to make sufficient space on its top surface. There is an antenna under the top surface and covering it may cause trouble to the radio transmission and reception. ! Depending on the location of this unit, some noise could be heard during playback of the songs on Bluetooth audio player. In this situation, move this unit so as to reduce noise. ! When mounting this unit, make sure none of the leads are trapped between this unit and the surrounding metalwork or fittings. ! Do not mount this unit near the heater outlet, where it would be affected by heat, or near the doors, where rainwater might splash onto it. ! Before drilling any mounting holes always check behind where you want to drill the holes. Do not drill into the gas line, brake line, electrical wiring or other important parts. ! If this unit installed in the passenger compartment, anchor it securely so it does not break free while the vehicle is moving, and cause injury or an accident. ! If this unit is installed under a front seat, make sure it does not obstruct seat movement. Route all leads and cords carefully around the sliding mechanism so they do not caught or pinched in the mechanism and cause a short-circuit. Installing this unit Mounting with Velcro fasteners Thoroughly wipe off the surface before affixing the Velcro fasteners. ! If the Velcro fasteners (hard) adhere to the car mat directly, you may install this unit without using the Velcro fasteners (soft). % Mount this unit using the Velcro fasteners. This unit Velcro fastener (hard) Velcro fastener (soft) Car mat or chassis Installing the microphone CAUTION It is extremely dangerous to allow the microphone lead to become wound around the steering column or gearstick. Be sure to install the unit in such a way that it will not obstruct driving. Note Install the microphone in a position and orientation that will enable it to pick up the voice of the person operating the system. En 37