Pioneer DEH-4300UB Owners Manual - Page 10

Section 03 Installation 2 Tighten two screws on each side. 1 3 2 1 Tapping screw (5 mm × 8 mm) 2 Mounting bracket 3 Dashboard or console Removing the unit 1 Remove the trim ring. For details, refer to Removing the front panel to protect your unit from theft and Re-attaching the front panel on page 5. 1 Trim ring 2 Notched tab ! Releasing the front panel allows easier ac- cess to the trim ring. ! When reattaching the trim ring, point the side with the notched tab down. 2 Insert the supplied extraction keys into both sides of the unit until they click into place. 3 Pull the unit out of the dashboard. Removing and re-attaching the front panel You can remove the front panel to protect your unit from theft. Press the detach button and push the front panel upward and pull it toward you. 18 En Additional Information Appendix English Troubleshooting Symptom Cause Action The display automatically returns to the ordinary display. You did not perform any operation within about 30 seconds. Perform operation again. The repeat play Depending on Select the repeat range changes the repeat play play range again. unexpectedly. range, the se- lected range may change when selecting another folder or track, or when fast forwarding/reversing. A subfolder is not played back. Subfolders cannot be played when FOLDER (folder repeat) is selected. Select another repeat play range. NO XXXX ap- There is no text pears when a information emdisplay is chan- bedded. ged (NO TITLE, for example). Switch the display or play another track/file. The display is illuminated when the unit is turned off. Demo mode is on. ! Press to cancel demo mode. ! Turn off the demo display setting. The unit is mal- You are using a Move electrical de- functioning. device, such as a vices that may be There is inter- cellular phone, causing the inter- ference. that transmits ference away from electric waves the unit. near the unit. Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to note the error message. Built-in CD Player Message Cause Action ERROR-11, 12, The disc is dirty. 17, 30 The disc is scratched. Clean the disc. Replace the disc. ERROR-10, 11, 12, 15, 17, 30, A0 There is an electrical or mechanical error. Turn the ignition switch OFF and back ON, or switch to a different source, then back to the CD player. ERROR-15 The inserted disc Replace the disc. is blank ERROR-23 Unsupported CD Replace the disc. format FRMT READ Sometimes there Wait until the mesis a delay be- sage disappears tween the start of and you hear playback and sound. when you start to hear any sound. NO AUDIO The inserted disc Replace the disc. does not contain any playable files. SKIPPED The inserted disc Replace the disc. contains DRM protected WMA files. PROTECT All the files on the inserted disc are embedded with DRM. Replace the disc. USB storage device/iPod Message Cause Action NO DEVICE FRMT READ When plug and play is off, no USB storage device or iPod is connected. ! Turn the plug and play on. ! Connect a compatible USB storage device/iPod. Sometimes there Wait until the mesis a delay be- sage disappears tween the start of and you hear playback and sound. when you start to hear any sound. En 19