Pioneer DEH-P8300UB Owner's Manual - Page 19

Available accessories Available accessories Section 03 English Select an XM band. 1 Press BAND/ESC. ! Band can be selected from XM-1, XM-2 or XM-3. Select a channel. 1 Push M.C. left or right. ! If you push and hold M.C. left or right, you can increase or decrease the channel number continuously. ! You can also perform tuning from a desired channel category. (Refer to Selecting a channel from a channel category on this page.) Switching the XM display 1 Press and hold DISP/ /SCRL. Advanced operations using special buttons Selecting the channel select mode 1 Press S.Rtrv/SAT MODE to cycle between: Channel number (channel number select setting)-Category (channel category select setting) Function and operation 1 Press M.C. to display the main menu. 2 Use M.C. to select FUNCTION. The function selection menu is displayed. Turn to change the menu option. Press to select. Storing and recalling broadcast stations You can easily store up to six stations for each band as presets. ! Six stations for each band can be stored in memory. 1 Press (list). Preset screen is displayed. 2 Use M.C. to store the selected station in memory. Turn to change the preset number. Press and hold to store. 3 Use M.C. to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing M.C. up or down. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. Channel mode (channel select mode setting) You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category. 1 Press M.C. to change the channel select mode. Channel number (channel number select setting)-Category (channel category select setting) Selecting a channel from a channel category 1 Switch the channel select settings to Category. Refer to Selecting the channel select mode on this page or Channel mode (channel select mode setting) on this page. 2 Push M.C. up or down to select the desired channel category. 3 Push M.C. left or right to select the desired channel in the selected channel category. Displaying the Radio ID 1 Select the channel select settings to Channel number. Refer to Selecting the channel select mode on this page or Channel mode (channel select mode setting) on this page. 2 Push M.C. left or right to select RADIO ID. # If you select another channel, display of the ID code is canceled. # RADIO ID and the ID codes are repeatedly displayed one after the other. SIRIUS Satellite Radio tuner You can use this unit to control a SIRIUS Satellite Radio tuner, which is sold separately. When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation manual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIRIUS operation manual. 1 SIRIUS band indicator 2 SIRIUS channel number indicator 3 SIRIUS preset number indicator 4 SIRIUS channel select setting indicator Shows what channel select setting has been selected. CH is displayed when Channel number is selected, and CAT is displayed when Category is selected. I.R is displayed during the Instant Replay mode. 5 SIRIUS channel name Shows the channel name of broadcast channel. Select a SIRIUS band. 1 Press BAND/ESC. ! Band can be selected from SR-1, SR-2 or SR-3. Select a channel. 1 Push M.C. left or right. ! If you push and hold M.C. left or right, you can increase or decrease the channel number continuously. ! You can also perform tuning from a desired channel category. (Refer to Selecting a channel from a channel category on the next page.) Listening to SIRIUS Satellite Radio 1 2 34 5 En 19