Pioneer DVR-650H-S Operating Instructions - Page 16
Connections, Easy connections
UPC - 012562853048
View all Pioneer DVR-650H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
02 Connections Easy connections The setup described here is a basic configuration that allows you to record TV programmes on both this recorder and your VCR. When watching recordings from this recorder, set your TV to input 1; switch to input 2 to watch a video playing in the VCR. Important • This recorder is equipped with copy protection technology. Do not connect this recorder to your TV via a VCR (or your VCR via this recorder) using AV cables, as the picture from this recorder will not appear properly on your TV. • Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet. 1 ANTENNA IN (RF IN) Antenna/cable TV wall outlet ANTENNA IN R AUDIO INPUT 3 L VIDEO S-VIDEO OUT ANTENNA OUT INPUT 1/AUTO START REC R AUDIO L VIDEO OUTPUT 2 S-VIDEO CONTROL IN Y PB PR COMPONENT VIDEO OUT OUTPUT 1 OUTPUT 1 2 To antenna input From antenna output VCR 3 To antenna input DIGITAL AUDIO OUT HDMI OUT COAXIAL AC IN 4 From audio/ video output 5 To audio/ video input 1 Connect your TV antenna/cable TV outlet to the ANTENNA IN (RF IN) jack on this recorder. 2 Use an RF antenna cable (one is supplied) to connect the ANTENNA OUT jack on this recorder to the antenna input on your VCR. • If you are not connecting a VCR in the chain, connect this recorder directly to your TV and skip the next step. 3 Use an RF antenna cable to connect the antenna output on your VCR to the antenna input on your TV. 4 Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) to a set of audio/ video inputs on your TV. Use the supplied three-pin audio/video cable. It is colour-coded to help you match them up (red/white for the right/left audio connections and yellow for video in/outs). Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound. 5 Connect your VCR to your TV (A/V IN 2 above) using a set of audio and video cables. • See the following page if you want to use S-video or component video cables for the video connection. To audio/video input TV 16 En