Pioneer DVR-650H-S Operating Instructions - Page 20

02 Connections Connecting to an AV amplifier or receiver To enjoy multichannel surround sound you need to connect this recorder to an AV amp/ receiver using the digital coaxial output. In addition to the digital connection, we recommend also connecting using the stereo analog connection. You'll probably also want to connect a video output to your AV amp/receiver. Use the standard (composite) video output (as shown here), or the S-video or component video connections. See also Audio Out on page 107 for how to set up the digital audio output. (Noise may be output from your speakers if the recorder is not set up to work with your AV amp/ receiver.) Important • Do not connect this recorder to your TV 'through' your VCR or other component using A/V cables. Always connect it directly to your TV. 1 ANTENNA IN (RF IN) Antenna/cable TV wall outlet ANTENNA IN INPUT 3 R AUDIO L VIDEO S-VIDEO OUT ANTENNA OUT INPUT 1/AUTO START REC R AUDIO L VIDEO OUTPUT 2 S-VIDEO CONTROL IN Y PB PR COMPONENT VIDEO OUT OUTPUT 1 OUTPUT 1 1 2 To audio/video input DIGITAL AUDIO OUT HDMI OUT COAXIAL AC IN DIGITAL AUDIO OUT To digital input 3 AV amp/ receiver To antenna input From video output 4 To video input TV 1 Connect RF antenna cables as shown. This enables you to watch and record TV channels. 2 Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) on this recorder to a set of audio/video inputs on your AV amp/receiver. 3 Use an coaxial digital audio cable (not supplied) to connect the DIGITAL AUDIO OUT (COAXIAL) jack on this recorder to an coaxial digital input on your AV amp/ receiver. This enables you to listen to multichannel surround sound.1 4 Connect the AV amp/receiver's video output to a video input on your TV. Note 20 1 If your AV amp/receiver doesn't have an coaxial digital input, but has a optical type, converter boxes that convert from coaxial to optical are available at specialist audio dealers. En