Pioneer DVR-650H-S Operating Instructions - Page 30

04 Getting started Chapter 4 Getting started Switching on and setting up When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output. If you're using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder. Important • Some of the Setup Navigator on-screen displays (OSDs) in this section vary slightly depending on the country or region of purchase. 1 Switch on your TV and set the video input to this recorder. STANDBY/ON 2 Switch on the recorder. When you switch on for the first time, your TV should display the Setup Navigator screen (If the Setup Navigator doesn't appear, you can also access it from the Initial Setup menu; see page 105). 4 ENTER Start the Setup Navigator. k Setting t LineCSoymstpelmete this setup before you start using your recorder. er Save P Start p Navigator Cancel Please use the Initial Setup if you want to make more detailed settings. • If you don't want to use the Setup Navigator, press to select Cancel, then press ENTER to exit the Setup Navigator. ENTER 5 ENTER. Select an option then press k SAetuttiongChannel Setting Line System er Save AEngtelinsnha P Cable p Navigator Do not Set • Select Do not set if you want to skip channel setup (because they have already been set up, for example). • You can go back to the previous screen in the Setup Navigator by pressing RETURN. ENTER 3 Choose a language (then press ENTER). Language English Español Italiano Português 30 En ENTER • Select your country. k SCetotuinngtry Selection t Line System er SCaovuentry P Mexico • Auto-tuning channels The Auto Scan option automatically scans and sets the channel presets. Tuning Cancel 32/68