Pioneer PDP-5060HD Owner's Manual - Page 17
Installing the Plasma Display, Installing the Media Receiver - 50 inch plasma
View all Pioneer PDP-5060HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Preparation Preparation Installing the Plasma Display 05 Installing the Media Receiver Plasma Display English Over 50 cm (19 11/16 inches) Over 10 cm (3 15/16 inches) Media Receiver STANDBY/ON REC ON STANDBY TIMER PULL OPEN System cable (approx. 3 m/9.8 feet) Location • Avoid direct sunlight. Maintain adequate ventilation. • The length of the system cable used to connect the Plasma Display and the Media Receiver is about 3 m (9.8 feet). • Because the Plasma Display is heavy, be sure to have someone help you when moving it. CAUTION • If you place anything on the top of the Media Receiver, it will not receive enough ventilation and will not operate properly. NOTE • Allow enough space around the upper and back parts when installing to ensure adequate ventilation of the rear of the unit. Using the optional PIONEER stand For details on installation, refer to the instruction manual supplied with the stand. CAUTION • This product can be used only with the optional PDK-TS10 and PDK-FS06 stand. Using other stands can result in instability, possibly causing injury. Using the optional PIONEER speakers For details on installation, refer to the instruction manual supplied with the speaker. STANDBY/ON CAUTION • Do not place a VCR or any other device on the top of the Media Receiver. • When installing, allow enough space on the sides and above the Media Receiver. • Do not block the side ventilation opening or the rear exhaust opening of the Media Receiver. STANDBY/ON REC ON STANDBY TIMER Over 5 cm (2 inches) PULL OPEN Over 5 cm (2 inches) Over 5 cm (2 inches) Ventilation opening Over 10 cm (3 15/16 inches) Exhaust opening CAUTION Placing the Media Receiver in the vertical position can result in product damage and malfunction. ON STANDBY REC TIMER CAUTION Operating Environment Operating environment temperature and humidity: +0 °C to +40 °C (+32 °F to +104 °F), less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) 17 En PULL OPEN