Pioneer VSX-14 Owner's Manual - Page 12
minute guide, Using the Quick Setup - power off
View all Pioneer VSX-14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
02 5 minute guide Using the Quick Setup You can use the Quick Setup to get your system up and running with just a few button presses. The receiver automatically makes the necessary settings after you have selected your speaker setup and room size. If you want to make more specific settings, refer to Choosing your receiver setup on pages 35 to 39. Use the front panel controls for the steps below. T LOUDNESS TONE QUICK SETUP MULTI JOG MULTI JOG ENTER INPUT SELECTOR MASTER VOLUME DOWN UP R 1 Press RECEIVER to turn the power on. The STANDBY indicator goes out. 2 Press QUICK SETUP. The display prompts you to select your speaker setup. 3 Use the MULTI JOG/INPUT SELECTOR dial to choose your speaker setup. Cycle between the following choices: 3.0ch 5.1ch 3.1ch 5.0ch 4.1ch 4.0ch Check the table below to find the speaker setup that corresponds with your system. Front Center Surround Sub Speakers Speaker Speakers Woofer 3.0 ch √ √ 3.1 ch √ √ √ 4.0 ch √ √ 4.1 ch √ √ √ 5.0 ch √ √ √ 5.1 ch √ √ √ √ 4 Press ENTER. The display prompts you to select your room size. 5 Use the MULTI JOG/INPUT SELECTOR dial to choose your room size. Depending on the distance of your surround speakers, choose between Small, Medium, or Large (see table below). Front Center Surround S 12 ft. 10 ft. 6 ft. M 12 ft. 10 ft. 7 ft. L 12 ft. 10 ft. 9 ft. 6 Press ENTER to confirm your setup. The display shows the speaker setup and room size that you have selected. 12 En