Pioneer VSX-14 Owner's Manual - Page 54

10 Additional information Problem No sound from surround or center speakers. Remedy • Refer to Speaker setting on page 36 to check the speaker settings. • Refer to Setting the relative volume level of each channel on page 39 to check the speaker levels. • Connect the speakers properly (refer to pages 18-19). Noise during playback of a cassette deck. • Move the cassette deck further from your receiver, until the noise disappears. Sound is produced from other components, but not from LD or DVD player. • Set the SIGNAL SELECT to AUTO, DIGITAL or ANALOG according to the type of connections made. (refer to page 31). • Set the digital input settings correctly (refer to page 38). • Make digital connections (refer to page 14) and set the SIGNAL SELECT to DIGITAL (refer to page 31). • Refer to the instruction manual supplied with the DVD player. No sound is output or a noise is • Set the digital volume level of the player to full, or to the output when software with DTS neutral position. is played back. • Refer to the manual supplied with the DVD player. When a search is performed by • This is not a malfunction, but be sure to turn the volume a DTS compatible CD player down to prevent the output of loud noise from your speakers. during playback, noise is output. Can't operate the remote control. • Replace the batteries (refer to page 6). • Operate within 23 feet ( 7 m), 30° of the remote sensor on the front panel (refer to page 7). • Remove the obstacle or operate from another position. • Avoid exposing the remote sensor on the front panel to direct light. The display is dark or off. • Press FL DIMMER on the remote control repeatedly to return to the default. If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. 54 En