Pioneer VSX-14 Owner's Manual - Page 28

04 Controls and displays Display 1 SIGNAL AUTO DIGITAL DIGITAL ANALOG DTS 2 3 45 678 9 DIGITAL ATT DIRECT MONITOR PROLOGIC MIDNIGHT STEREO TUNED ADV.SURR. LOUDNESS MONO SP A dB 10 11 12 13 14 1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO : Lights when AUTO signal select is on. DIGITAL : Lights when a digital audio signal is detected. 2 DIGITAL : Lights when a Dolby Digital signal is detected. ANALOG : Lights when an analog signal is detected. DTS : Lights when a source with DTS audio signal is detected. 2 DTS When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal. 3 2 DIGITAL When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal. 4 2 PRO LOGIC II When the Standard mode of the receiver is on, this lights to indicate Prologic II decoding. 5 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the input signal (can only be used with an analog signal). 6 DIRECT Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source. 7 MIDNIGHT Lights during Midnight listening. 8 MONITOR Lights when MONITOR is selected. 9 Speaker indicator Shows if the speaker system is on or not. SP 3A means speakers are switched on. SP 3 means the headphones are connected. 10 Character display 11 ADV. SURR. (Advanced Surround) Lights when one of the Advanced Surround listening modes of the receiver is selected. 28 En