Pioneer VSX-14 Owner's Manual - Page 44
Making Recordings, Making an audio or a video, recording
View all Pioneer VSX-14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
08 Making Recordings Making an audio or a video recording You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV) through the analog jacks. You will need to connect a CD recorder, tape deck, MD, VCR, or DVR deck to the CD-R/TAPE/MD or VCR/DVR outputs on the receiver to do so (see pages 14-15 for more on this). Monitoring your recording You can listen to (monitor) the recording as it's being made using the MONITOR button on the front panel (a cassette deck would have to have a record monitor function). • Press the MONITOR button to switch between the recorded signal and the original source signal. The receiver's volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal. 1 Select the source you want to record. Use the INPUT SELECTOR (VSX-D412)/MULTI CONTROL (VSX-D512) buttons on the remote (or MULTI JOG/INPUT SELECTOR dial on the front panel). 2 Prepare the source you want to record. Tune to the radio station, load the CD, video, DVD etc. 3 Prepare the recorder (connected to either the CD-R/TAPE/MD or VCR/DVR outputs). Insert a blank tape, MD, video etc. into the recording device and set the recording levels. Refer to the instructions that came with the recorder if you are unsure how to do this. Most video recorders set the audio recording level automatically-check the component's instruction manual if you're unsure. 4 Start recording, then start playback of the source component. 44 En