Pioneer VSX-92TXH Owner's Manual - Page 46
Select 'MCACC Data Check' from the Data
View all Pioneer VSX-92TXH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
07 The System Setup menu 1 Select 'MCACC Data Check' from the Data Management setup menu. DVD/LD - 55.0dB 5. Data Management a. MCACC Data Check b. Memory Rename c. MCACC Memory Copy d. MCACC Memory Clear e. Output PC DVD/LD - 55.0dB 5a. MCACC Data Check 1. Speaker Setting 2. Channel Level 3. Speaker Distance 4. Standing Wave 5. Acoustic Cal EQ 6. FULL BAND PHASE CTRL :Return ENTER:Next :Return 2 Select the setting you want to check. • It is useful to do this while a source is playing so you can compare the different settings. 3 Select the MCACC preset that you want to check. Use the / buttons if necessary to switch speakers/ settings. DVD/LD - 5 5 . 0 dB 5a5. EQ Data Check MCACC M1 63Hz : +0.5 Ch [SBL] 125Hz : -5.5 dB 250Hz : +3.0 500Hz : 0.0 1kHz :+12.0 2kHz : +5.5 4kHz : -3.0 63 125 250 500 1k 2k 4k 8k 16k TRIM 8kHz : 0.0 16kHz : +7.0 :Return TRIM : -2.5 4 Press RETURN to go back to the Data Check menu, repeating steps 2 and 3 to check other settings. 5 When you're finished, press RETURN. You will return to the Data Management setup menu. Renaming MCACC presets If you have several different MCACC presets that you're using, you may want to rename them for easier identification. 1 Select 'Memory Rename' from the Data Management setup menu. DVD/LD - 55.0dB 5. Data Management a. MCACC Data Check b. Memory Rename c. MCACC Memory Copy d. MCACC Memory Clear e. Output PC :Return DVD/LD - 55.0dB 5b. Memory Rename MCACC Position Rename M1 MEMORY 1 M2 [ MEMORY 2 ] M3 [ MEMORY 3 ] M4 [ MEMORY 4 ] M5 [ MEMORY 5 ] M6 [ MEMORY 6 ] :Finish 2 Select the MCACC preset you want to rename, then select an appropriate preset name. Use / to select the preset, then / to select a preset name. 3 Repeat for as many MCACC presets as necessary, then press RETURN when you're finished. You will return to the Data Management setup menu. Copying MCACC preset data If you want to manually adjust the Acoustic Calibration EQ (see Manual MCACC setup above), we recommend copying your current settings1 to an unused MCACC preset. Instead of just a flat EQ curve, this will give you a reference point from which to start. 1 Select 'MCACC Memory Copy' from the Data Management setup menu. DVD/LD - 5 5 . 0dB 5. Data Management a. MCACC Data Check b. Memory Rename c. MCACC Memory Copy d. MCACC Memory Clear e. Output PC :Return DVD/LD - 5 5 . 0dB 5c. MCACC Memory Copy Copy All Data From [ M1. MEMORY 1 ] To [ M2. MEMORY 2 ] Start Copy [Cancel ] :Cancel 2 Select the setting you want to copy. • All Data - Copies all the settings of the selected MCACC preset memory. • LEVEL & DISTANCE - Copies only the channel level and speaker distance settings of the selected MCACC preset memory. 3 Select the MCACC preset you'll be copying the settings 'From' then specify where you want to copy them ('To'). Make sure you don't overwrite an MCACC preset you're currently using (this can't be undone). 4 Select 'Copy' to confirm and copy the settings. Completed shows in the OSD to confirm the MCACC preset has been copied, then you automatically return to the Data Management setup menu. Clearing MCACC presets If you are no longer using one of the MCACC presets stored in memory, you can choose to clear the calibration settings of that preset. 1 Select 'MCACC Memory Clear' from the Data Management setup menu. DVD/LD - 5 5 . 0dB 5. Data Management a. MCACC Data Check b. Memory Rename c. MCACC Memory Copy d. MCACC Memory Clear e. Output PC DVD/LD - 55.0dB 5d. MCACC Memory Clear Clear M1. MEMORY 1 Start clear [Cancel] :Return :Cancel 2 Select the MCACC preset you want to clear. Make sure you don't clear an MCACC preset you're currently using (this can't be undone). 3 Select 'Clear' to confirm and clear the preset. Completed shows in the OSD to confirm the MCACC preset has been cleared, then you automatically return to the Data Management setup menu. Note 1 The settings made in Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 8 or Automatic MCACC (Expert) on page 36. 46 En