Pioneer VSX-92TXH Owner's Manual - Page 64
Advanced MCACC output using your PC
View all Pioneer VSX-92TXH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
08 Other connections Use a commercially-available cable to connect the RS232C jack on your computer to the 9-pin RS-232C jack on this receiver. See the documentation provided with the Advanced MCACC application for more information. RS-232C Personal computer Advanced MCACC output using your PC Before continuing, make sure you have completed step 1 in Data Management on page 45. Note that transmission data is erased when the receiver is turned off. 1 Select 'Output PC' and press ENTER. When the receiver is ready for transmission, Start the MCACC application on your PC shows on the OSD. DVD/LD - 55.0dB 5. Data Management a. MCACC Data Check b. Memory Rename c. MCACC Memory Copy d. MCACC Memory Clear e. Output PC DVD/LD 5e. Output PC - 55.0dB Start the MCACC application on your PC. :Return :Cancel 2 Start the MCACC application on your computer. Follow the instructions provided with the application. It will take about ten seconds for the transmission to complete, then you will be able to analyze the output on your computer. Since the data will be cleared from the receiver when you restart reverb measurement or turn off the receiver, you might want to save the information on your PC after measurement. 3 When you're finished, press RETURN. You will return to the Data Management menu. Continue with other settings in the Data Management menu if necessary. Press RETURN again to exit the Data Management menu. 64 En