RCA BRC11072E BRC11072E Product Manual - Page 12

Playing a Blu-ray Disc or DVD EN This owner's manual explains the basic instructions for operating this unit. Some discs are produced in a manner that allows specific or limited operation during playback. Therefore, this unit may not respond to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specific disc in question for more information about the options available on that disc. " " may appear on the screen during operation. A " " means that the desired operation is not permitted by the unit or disc. Playing a Blu-ray Disc or DVD 1. Press button to turn on the unit. See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 2. 2. Press button to open the disc door. 3. Gently place the disc in the tray. 4. Press button to close the disc door. It takes a short while for your unit to load the disc. After loading, for most discs, the unit will automatically take you to the main menu or start playing. If the unit does not automatically start playing the disc, press the PLAY button. Pausing Playback (Still Mode) Press the (PAUSE) STEP button to pause. To resume normal playback, press the PLAY button. Each time you press the (PAUSE) STEP button, the picture advances one frame on disc. Stopping Playback To stop playback, press the STOP button. To resume playback, press the PLAY button. Depending on the disc, playback starts where it stopped or at the beginning of the disc. If you press the STOP button twice, the unit's memory will be cleared and pressing the PLAY button will reset the disc to the beginning. Skipping to a Different Track • Press the SKIP button to go back to previous titles/chapters/tracks. • Press the SKIP button to advance titles/chapters/tracks. • For an audio CD, use the number buttons on the remote control to go directly to the desired track number. Zooming into an image While a disc is playing, press the ZOOM button to enlarge the image in serveral levels. • While an image is zoomed, you can use the , , or CURSOR button to shift the view and display the part you want. • To return to normal view, press the ZOOM button repeatedly until "OFF" shows. The screen will return to normal. • When you reach the edge of the image, the display will not shift anymore in the direction. Fast Forward / Fast Reverse 1. Press the or button when a disc is playing. • The disc begins a fast scan at two times normal (x2) speed. • Each time the or button is pressed, the speed of the fast scan changes. 2. Press the PLAY button when you have reached the desired point to resume playback at normal speed. x2 x4 x8 x16 x32 x2 x4 x8 x16 x32 Audio Selection On some discs, the sound is recorded in two or more formats. Follow the directions below to select the type of playback. 1. While a disc is playing, press the AUDIO button to show the current audio format number. 2. Press the AUDIO button repeatedly to select the desired audio format. Note: • If only one audio format is recorded, the number does not change. • About two seconds later, playback continues in the new audio format. 12 BRC11072E_English_010.indd 12 3/23/2011 10:52:45