Ricoh 2238 Operating Instructions - Page 149

Supplementary Specifications ❖ Duplex • You cannot use the following copy paper with this function: • Paper smaller than A5, 51/2" × 81/2" (possible on A5K, 51/2" × 81/2"K) • Paper thicker than 105 g/m2, 28 lb. • Paper thinner than 60 g/m2, 17 lb. • Translucent paper • OHP transparencies • Label paper (adhesive labels) • Postcards • When an odd number of originals is placed in the ADF, the back of the last page of copied paper is blank. • During copying, the image is shifted to allow for the binding margin. • The following paper sizes can be duplexed: A3L, B4 JISL, A4KL, B5 JISKL, A5K, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL ❖ Combine • In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio depends on copy paper sizes and the number of 6 originals. • The reproduction ratios you can specify are 25-400%. • If the calculated ratio is under the minimum ratio, it will be automatically adjusted to within acceptable range. However, with some ratios, parts of the image might not be copied. • You cannot use custom size paper. • If the orientation of originals is different from that of the copy paper, the machine will automatically rotate the image by 90° to make copies properly. • If the number of originals placed is less than the number specified for combining, the last page segment will be left blank as shown. 135