Ricoh 2238 Operating Instructions - Page 56
Directional Size Magnification, Specifd. Ratio, Direct. Mag., Horizontal, Vertical, Start
UPC - 026649116032
View all Ricoh 2238 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Copying B Press [Specifd. Ratio]. C Press [Direct. Mag.%]. Directional Size Magnification (mm) To enter the ratio using the number keys A suitable reproduction ratio is automatically selected when you enter the horizontal and vertical lengths of the 2 A Press [Horizontal]. original and copy image you require. B Enter the ratio using the number keys, and then press [#]. C Press [Vertical]. D Enter the ratio using the number keys, and then press [#]. E Press [OK]. To specify a ratio using [n] and [o] A Press [With no]. B Press [Horizontal]. C Adjust the ratio using [n] or [o]. Note ❒ Pressing [n] or [o] changes the ratio in increments of 1%. Pressing and holding down [n] or [o] changes it in increments of 10%. ❒ If you have incorrectly entered the ratio, readjust it using [n] or [o]. D Press [Vertical]. E Adjust the ratio using [n] or [o]. F Press [OK]. D Press [OK]. E Place the originals, and then press the {Start} key. CP2M01EE 1. Horizontal original size 2. Vertical original size 3. Horizontal copy size 4. Vertical copy size Preparation Specify the vertical and horizontal size of the original and that of the copy, as shown. Note ❒ You can enter sizes within the following ranges: Metric version Vertical: 1-999 mm (increments of 1 mm) Horizontal: 1-999 mm (increments of 1 mm) Inch 0.1"-99.9" (increments of 0.1") version 42