Ricoh 2238 Operating Instructions - Page 38
When copying onto OHP, Transparencies or Thick Paper, Horiz mm, Program, Start, Clear Modes
UPC - 026649116032
View all Ricoh 2238 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Copying D Enter the horizontal size of the paper using the number keys, and then press [#]. When copying onto OHP Transparencies or Thick Paper Note ❒ If [Horiz mm] is not highlighted, press [Horiz mm]. To make copies onto OHP transparencies or thick paper, you need to specify the paper type and size. See 2 ❒ To register the custom size entered, press [Program], and p.23 "When copying onto standard size paper", p.23 "When copying onto then press [Exit]. custom size paper". Important ❒ We recommend you use OHP transparencies made by this manufacturer. E Press [OK]. D Place the originals, and then press the {Start} key. Note ❒ When the Sort function is set, press the {#} key after all originals have been scanned. E When your copy job is finished, press the {Clear Modes} key to clear the settings. Note ❒ Paper will be delivered to external tray when copying onto OHP transparencies or thick paper from the bypass tray, even if you have specified not to use the external tray as the output tray. A Open the bypass tray, and then adjust the guides to the paper size. B Gently insert the OHP transpar- encies or thick paper face up until the beeper sounds. Important ❒ When copying onto OHP trans- parencies, make sure that the cut positions are set properly. ❒ To avoid paper misfeeds, fan the paper before loading it in the tray. C Press the {#} key. 24