Ricoh 2238 Operating Instructions - Page 78
Double Copies, Specified Area Repeat
UPC - 026649116032
View all Ricoh 2238 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Copying Specified Area Repeat G Enter the length of [X1] with the number keys, then press [#]. You can use this function only when you are making a copy from the Exposure Glass. H Enter the length of [Y1] with the number keys, then press [#]. Note I Enter the length of [X2] with the 2 ❒ The base point X1, Y1, and the length set by point X2, Y2 determines the area of an image repeatedly copied. number keys, then press [#]. J Enter the length of the [Y2] by number keys, then press [#]. Limitation K Press [OK] three times. ❒ You cannot use the specified area repeat from ADF. L Place the original on the exposure glass, and then press the {Start} key. Double Copies One original image is copied twice onto one sheet, as shown. 1. Set on the exposure glass A Specify the location of the area's base point (X1, Y1), and its length and width (X2, Y2). Note ❒ You can set any value in the range of X1: 0~412mm (0"~16.2"), X2: 20~432mm (0.8"~17.0"), Y1: 0~277mm (0"~10.8"), and Y2: 20~297mm (0.8"~11.6"). B Select the size of the copy paper and the reproduction ratio. C Press [Edit/Colour Creation]. D Press [Edit Image]. E Press [Image Repeat]. F Press [Specified Area]. Note ❒ You cannot use the bypass tray with this function. ❒ See the following table for original and copy paper sizes and orientations when using a 100% ratio: 64