Ricoh 3035 Printer Reference - Page 155
Troubleshooting, Error & Status Messages on the Display Panel - developer
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Troubleshooting Troubleshooting Error & Status Messages on the Display Panel This section describes the principal messages that appear on the panel display. If a message not described here appears, act according to the message. Reference Before turning the main power off, see "Turning On the Power", General Settings Guide. ❖ Status messages Message Hex Dump Mode Offline Please wait. Printing... Ready Resetting job... Setting change... Waiting... Status In the Hex Dump mode, the machine receives data in hexadecimal format. Turn off the machine after printing, and then turn back on. The machine is offline. To start printing, switch the machine online by pressing [Online] on the display panel. The machine is preparing the development unit. Wait a while. The machine is printing. Wait a while. This is the default ready message. The machine is ready for use. No action is required. The machine is resetting the print job. Wait until "Ready" ap- pears on the display panel. 8 The machine is setting changing. Wait a while. The machine is waiting for the next data to print. Wait a while. ❖ Alert messages Messages/Second messages Causes Solutions Authentication has failed. The login user name or password entered is incorrect. The machine currently cannot perform authentication. Check your login user name and password. Consult an administrator. Ethernet board has a problem. An error has occurred in the Ethernet board. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. HDD has a problem. An error has occurred in the hard disk drive. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. 149