Ricoh 3035 Printer Reference - Page 20
Driver, Command, Bypass Tray, Setting Priority, System, Printer Features, Machine Settings - printer driver
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Getting Started A Open the bypass tray. C Gently insert paper face up into the bypass tray until the beeper sounds. 1 Note ❒ The beeper will not sound if it is turned off. Gently insert paper until it stops. AJL006S B Adjust the paper guides to the pa- per size. Open out the extender to support paper sizes larger than A4 L, 81/2 ×11 L. Important ❒ If the paper guides are not flush against the paper, skewing and misfeeds might occur. ❒ Do not stack paper over the limit mark, otherwise a skewed image or misfeeds might occur. ❒ Fan the paper to get air between the sheets to avoid a multi-sheet feed. D Select the paper size. Note ❒ The following procedures are not required if you select [Driver / Command] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see p.128 "System"). In that case, set the paper size using the printer driver. ❒ If you select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see p.128 "System"), the settings made using the control panel have priority over the printer driver settings. 1. Extender 2. Paper guides AJL007S ❒ If the printer driver is not used, select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see p.128 "System"). Set paper size using the control panel. 14