Ricoh 3035 Printer Reference - Page 18
Connecting to the Ethernet Interface, BASE-T / 100 BASE-TX port. - parts
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Getting Started E Turn on the computer. B Turn off the main power switch. Note Important ❒ When using Windows 95 / 98 / Me ❒ Make sure the main power is off. 1 / 2000 / XP and Windows Server See "Turning On the Power", 2003, a printer driver installation General Settings Guide. screen might appear when the computer is turned on. If this happens, click [Cancel] on the screen. C Connect the Ethernet cable to the 10 BASE-T / 100 BASE-TX port. For more information, see p.17 "Preparing the Machine". The machine and computer are now connected. The printer driver must be installed next. For information about how to install the printer driver, see p.17 "Preparing the Machine". Connecting to the Ethernet Interface The network interface board supports 10 BASE-T or 100 BASE-TX connections. Important ❒ Before making the connection, touch the metallic part to ground yourself. A Attach the supplied ferrite core to the end of the Ethernet cable. AJL019S D Turn on the main power switch. AJM005S 1. Indicator (green) Remains green when the machine is properly connected to the network. 2. Indicator (yellow) Turns yellow when 100 BASE-TX is operating. Turns off when 10 BASE-T is operating. AJL014S 12