Ricoh 3035 Printer Reference - Page 17

Connecting the Machine to the Host Using the Parallel Cable / IEEE 1394 (SCSI print) Cable

Page 17 highlights

Connecting the Machine Connecting the Machine to the A Turn off the main power switches of the machine and computer. Host Using the Parallel Cable / IEEE 1394 (SCSI print) Cable Important ❒ Before turning off the main pow- 1 Connect the machine to the host computer using the optional parallel er switch, see "Turning Off the Power", General Settings Guide. board or the optional IEEE 1394 interface board. This machine does not come with a parallel cable to connect B Plug the cable into the connector on the machine's interface. the machine to the host computer. ❖ Parallel Connection The machine's parallel interface is a standard bidirectional interface. It re- quires a standard IEEE 1284 compli- ant 36-pin parallel cable and a parallel port on the host computer. Make sure you purchase the appropriate cable for the machine and your computer. Note ❒ Do not use a parallel cable that is longer than 3 meters (10 feet). ❒ Rating voltage of the interface connector: Max. DC 5V Follow the procedure to connect the machine to the host computer using a parallel cable or IEEE 1394 interface cable. AJL004S ❖ IEEE 1394 (SCSI print) Connection Important ❒ Before connecting the machine and a computer using an interface cable, make sure the machine is not operating, and then turn off the main power switches of the machine and computer. ❒ Be sure to use a specified interface cable. Other cables may cause radio interference. AJL005S C Plug the other end of the cable into the connector on the computer's interface. D Turn on the machine's main power switch. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174

Connecting the Machine
11
1
Connecting the Machine to the
Host Using the Parallel Cable /
IEEE 1394 (SCSI print) Cable
Connect the machine to the host com-
puter using the optional parallel
board or the optional IEEE 1394 inter-
face board. This machine does not
come with a parallel cable to connect
the machine to the host computer.
The machine's parallel interface is a
standard bidirectional interface. It re-
quires a standard IEEE 1284 compli-
ant 36-pin parallel cable and a parallel
port on the host computer. Make sure
you purchase the appropriate cable
for the machine and your computer.
Note
Do not use a parallel cable that is
longer than 3 meters (10 feet).
Rating voltage of the interface con-
nector: Max. DC 5V
Follow the procedure to connect the
machine to the host computer using a
parallel cable or IEEE 1394 interface
cable.
Important
Before connecting the machine and
a computer using an interface ca-
ble, make sure the machine is not
operating, and then turn off the
main power switches of the ma-
chine and computer.
Be sure to use a specified interface
cable. Other cables may cause ra-
dio interference.
A
Turn off the main power switches
of the machine and computer.
Important
Before turning off the main pow-
er switch, see “Turning Off the
Power”,
General Settings Guide
.
B
Plug the cable into the connector
on the machine’s interface.
Parallel Connection
IEEE 1394 (SCSI print) Connection
C
Plug the other end of the cable into
the connector on the computer’s
interface.
D
Turn on the machine's main power
switch.
AJL004S
AJL005S