Ricoh AP2610 Setup Guide - Page 41
b Interface Unit Type
UPC - 026649007576
View all Ricoh AP2610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
802.11b Interface Unit Type A 802.11b Interface Unit Type A Note D Use a coin to remove the two ❒ Depending on the model you use, screws. the 802.11b Interface Unit, the 1394 Interface Unit, and the Network Interface Board cannot be installed to the printer at the same time. For Note ❒ These screws are used again in step N. 2 more information, see p.11 "In- stalling Options". Important ❒ Before touching the 802.11b Inter- face Unit, touch something metal to discharge any static electricity. Static electricity can damage the 802.11b Interface Unit. A Check the contents of the box for the following items: • 802.11b Interface Unit • Installation Guide B Confirm that the followings are true: • The power switch is turned off. • The interface cable is unplugged from the printer. ZGDX280J E Pull out the handle of the control- ler board. Note ❒ If the Duplex Unit is not at- tached, go to step D. C If the Duplex Unit is attached, push down the lever on right side (A) and pull out the Duplex Unit until it stops (B). ZGDX370J F Pull the handle and slide the con- troller board out. ZGDX320J ZGDX260J 29