Ricoh AP2610 Setup Guide - Page 44
Hard Disk Drive Type 2600, HDD Error, Initialize ?
UPC - 026649007576
View all Ricoh AP2610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installing Options Hard Disk Drive Type 2600 Important D Slowly insert the Hard Disk ❒ Before touching the Hard Disk Drive while aligning it with the Drive, touch something metal to top and bottom rails in the printer discharge any static electricity. until it stops. 2 Static electricity can damage the Hard Disk Drive. A Check the contents of the box for the following items: • Hard Disk Drive • Installation Guide B Confirm that the followings are true: • The power switch is turned off. • The interface cable is unplugged from the printer. ZCEX151J E Fasten the Hard Disk Drive. C Use a coin to remove the two screws, and then remove the cov- er. Note ❒ The screws and cover are not used when installing the Hard Disk Drive. ZCEX360J F Attach the interface cable to the printer. G Plug the printer's power cord back into the wall outlet, and then turn on the power switch. The following message appears on the panel display. ZCEX350J HDD Error Initialize ? 32