Ricoh AP2610 Setup Guide - Page 58
IEEE 1394 Setup, IP Address1394, IP Address1394, SCSI print, SCSI print, Active
UPC - 026649007576
View all Ricoh AP2610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Configuring the Printer for the Network G Assign the IP address to the printer. Do not overlap the IP address in the same subnet or the same IP address in the network setting. Note ❒ To get the IP address for the printer, contact your network administrator. A Press {U} or {T} until the fol- 3 lowing message appears. IEEE 1394 Setup: IP Address1394 B Press {Enter #}. The current IP address appears on the panel display. IP Address1394: 000.000.000.000 C Press {U} or {T} to enter the leftmost entry field of the IP address. IP Address1394: 192.022.033.044 D Press {Enter #}. The pointer (k) moves to the next entry field automatically. IP Address1394: 192.02k.033.044 Note ❒ The value moves by 10 if {U} or {T} is kept pressed. ❒ You can return the pointer (k) to the previous (left) entry field by pressing {Escape}. ❒ If you press {Escape} when the pointer (k) is on the leftmost position, the selected IP address is reset. 46 E Repeat steps C and D to enter the IP address. IP Address1394: 192.168.000.011 Check if the pointer (k) is at the rightmost position, and press {Enter #} to register the IP address you selected. IEEE 1394 Setup: IP Address1394 H Set "Subnet Mask1394" in the same way. I Set "SCSI print" and "Bidi-SCSI print" if necessary. Note ❒ The default setting is "Active". J Press {U} or {T} to display "SCSI print". IEEE 1394 Setup: SCSI print K Press {Enter #}. The following message appears on the panel display. SCSI print: *Active L Press {U} or {T} to select either "Active" or "Not Active", and then press {Enter #}. Set " Bidi-SCSI print " in the same way.