Ricoh Aficio SP 5210DN Software Guide - Page 134
Bidirectional Comm., Wireless LAN, Communication Mode, SSID Setting, Ad-hoc Channel
View all Ricoh Aficio SP 5210DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
4. Making Printer Settings Using the Control Panel Bidirectional Comm. Specify whether to enable or disable bi-directional communication. Default: [On] • On • Off Wireless LAN Configure settings for Wireless LAN. This menu appears only when the optional Wireless LAN interface unit is installed. Communication Mode 4 Specify the transmission mode for Wireless LAN. Default: [Infrastructure Mode] • 802.11 Ad-hoc Mode • Infrastructure Mode SSID Setting Specifies SSID to distinguish the access point in [Infrastructure Mode] or [802.11 Ad-hoc Mode]. The characters that can be used are ASCII 0x20-0x7e (32 bytes). If blank is specified in [802.11 Ad-hoc Mode], "ASSID" appears. Ad-hoc Channel Specify the channel to use when [802.11 Ad-hoc Mode] has been selected. Set the channel that matches the type of wireless LAN being used. The channel in use might differ depending on the country. The following channels are available: (mainly Europe and Asia) • IEEE 802.11a/b/g Wireless LAN Frequency range: 2412 - 2472 MHz (1 - 13 channels) 5180 - 5240 MHz (36, 40, 44, and 48 channels) In some countries, only the following channels are available: • IEEE 802.11b/g Wireless LAN Frequency range: 2412 - 2462 MHz (1 - 11 channels) Default: [11] (mainly North America) • IEEE 802.11a/b/g Wireless LAN 132