Ricoh MP161SPF General Settings Guide - Page 29

Network Settings Note ❒ For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- 1 terface takes precedence. ❒ SMTP Server and Fax E-mail Account must be specified in order to use the send function. ❒ When POP before SMTP is set to [On], also make setting for Reception Protocol and POP3/IMAP4 Settings. ❒ When SMTP Authentication is set to [On], also make setting for Admin. Email Address. ❒ E-mail Communication Port and Fax E-mail Account must be specified in order to use the reception function. ❒ When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port. Reference p.48 "Interface Settings" p.55 "File Transfer" IEEE 802.11b (wireless LAN) This section lists the settings required for using Internet FAX with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see "Interface Settings" and "File Transfer". Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communictn. Interface Settings/Network Permit SSL/TLS Comm. Interface Settings/Network Host Name Interface Settings/ IEEE 802.11b Communication Mode Setting Requirements Necessary Necessary As required As required As required As required Necessary Necessary As required As required As required Necessary 19