Ricoh MP161SPF General Settings Guide - Page 93
Original Count Display, Reproduction Ratio, Preset R/E Priority, Duplex Margin, Reduce, Enlarge
View all Ricoh MP161SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Copier Features ❖ Original Count Display You can set to display the count of originals and copying pages on the display when [On] is selected. The default setting is Off. ❖ Reproduction Ratio You can select which reduce, enlarge, or input ratio is shown on the display with priority when [Reduce] or [Enlarge] is selected. Reduce or Enlarge ratios for setting are as follows: The default setting for "Ratio 1" is 50% (Metric version) / 65% (Inch version). The default setting for "Ratio 2" is 71% (Metric version) / 78% (Inch version). The default setting for "Ratio 3" is 93% (Metric version) / 93% (Inch version). 3 The default setting for "Ratio 4" is 141% (Metric version) / 129% (Inch ver- sion). The default setting for "Ratio 5" is 200% (Metric version) / 155% (Inch ver- sion). You can set a ratio other than the above. A Select [Reproduction Ratio] using {U} or {T}, and then press the {OK} key. B Select the ratio you want change using {U} or {T}, and then press the {OK} key. C Select [User R/E Ratio] using {U} or {T}, and then press the {OK} key. D Enter a ratio using the number keys from "50-200", and then press the {OK} key. The "programmed" message appears. ❖ Preset R/E Priority You can set the ratio with priority when [R/E] is selected. Using the number keys, enter the ratio from "50-200" in units of 1%. The default setting is 71% (Metric version) / 65% (Inch version). ❖ Duplex Margin Specify left margin on the back side of copies, and top margin on the front side. Select [Top Margin] or [Left Margin], and then set the required value. • Top Margin: 0-50mm, 0"-2.0" • Left Margin: 0-50mm, 0"-2.0" The default setting is 5 mm (Metric version) / 0.2 inch (Inch version). 83