Ricoh MP161SPF General Settings Guide - Page 52

System Settings ❖ Panel Key Sound The beeper (key tone) sounds when a key is pressed. The default setting is On. ❖ Warm-up Beeper (copier) You can have the beeper sound when the machine becomes ready to copy af- ter leaving Energy Saver mode, or when the power is turned on. 2 The default setting is On. ❖ Copy Count Display The copy counter can be set to show the number of copies made (count up) or the number of copies yet to be made (count down). The default setting is Up. ❖ Function Priority Specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on. The default setting is Copier. ❖ Print Priority Gives print priority to the mode displayed. The default setting is Display mode. When [Interleave] is selected, the current print job will be interrupted after a maximum of five sheets. ❖ Function Reset Timer You can set the length of time the machine waits before changing modes when using the multi-access function. This is useful if you are making many copies and have to change settings for each copy. If you set a longer reset period, you can prevent interruption from other functions. The Function Reset Timer setting is ignored if [Interleave] is set for Print Priority. The default setting is Set Time. When you select [Set Time], enter the time (3-30 seconds, in 1 second increments) using the number keys. The default setting for Set Time is 3 seconds. ❖ Screen Contrast You can adjust the brightness of the display. The default setting is "4" (the halfway/medium setting). ❖ Key Repeat Set whether or not to repeat the functions of the {U}, {T}, {Lighter}, and {Darker} keys when those keys are pressed and held down. The default setting is Normal / On. 42