Ricoh MP161SPF General Settings Guide - Page 61

Interface Settings ❖ Ping Command Check the network connection with ping command using given IPv4 address. If you fail to connect to the network, check the following, and then retry the ping command. • Make sure that "IPv4" in [Effective Protocol] is set to "Active". • Check that the machine with assigned IPv4 address is connected to the net- work. • Check if the same IPv4 address is used for the specified equipment. 2 ❖ Permit SNMPv3 Communictn. Set the encrypted communication of SNMPv3. The default setting is Encryption/Clear Text. If you select to [Encryption Only], you need to set an encryption password for the machine. ❖ Permit SSL/TLS Comm. Set the encrypted communication of SSL/TLS. The default setting is Ciphertext/Clear Text. If you set to [Ciphertext Only], you need to install the SSL certificate for the machine. ❖ Host Name Specify the host name. Enter the host name using up to 63 characters. ❖ Machine Name Specify the machine name. Enter the machine name using up to 31 characters. Reference p.4 "Accessing User Tools" "Settings You Can Change With User Tools", Network Guide 51