Ricoh MP161SPF General Settings Guide - Page 34

Connecting the Machine Note ❒ For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. 1 ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. Reference p.48 "Interface Settings" p.55 "File Transfer" IEEE 802.11b (wireless LAN) This section lists the settings required for sending file with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see "Interface Settings" and "File Transfer". Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Setting Requirements Necessary Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communictn. Interface Settings/Network Permit SSL/TLS Comm. Interface Settings/Network Host Name Interface Settings/ IEEE 802.11b Communication Mode Interface Settings/ IEEE 802.11b SSID Setting Interface Settings/ IEEE 802.11b Channel As required As required Necessary Necessary As required As required As required Necessary As required As required Interface Settings/ IEEE 802.11b Security Type As required Interface Settings/ IEEE 802.11b File Transfer Communication Speed Default User Name/PW(Send) As required As required 24