Ricoh MP161SPF General Settings Guide - Page 60
SMB Computer Name, SMB Work Group, Ethernet Speed, LAN Type, Auto Select
View all Ricoh MP161SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
System Settings ❖ SMB Computer Name Specify the SMB computer name. Enter the computer name using up to 15 characters and spaces cannot be entered. Do not set a computer name starting with RNP and rnp. Use uppercase letters for alphabets. ❖ SMB Work Group 2 Specify the SMB work group. Enter the group name using up to 15 characters. and spaces cannot be entered. Use uppercase letters for alphabet. ❖ Ethernet Speed Set the access speed for networks. Select a speed that matches your network environment. [Auto Select] should usually be selected. The default setting is Auto Select. • Setting the Ethernet Speed Confirm your network environment, and then select a speed that matches it using the following table. Machine Router/ HUB 10Mbps Half 10Mbps Full 100Mbps Duplex Duplex Half Duplex 10Mbps Half b Duplex - - 10Mbps Full Duplex - b - 100Mbps Half Duplex - - b 100Mbps Full Duplex - - - Auto Select b - b 100Mbps Full Duplex - - - b - Auto Select b b b ❖ LAN Type When you have installed the optional IEEE 802.11b interface unit, select the method of connection. The default setting is Ethernet. [LAN Type] is displayed when wireless LAN board is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected interface has priority. 50