Ricoh MP161SPF General Settings Guide - Page 37
Settings Required to Use Network TWAIN Scanner
View all Ricoh MP161SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Network Settings Note ❒ For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are 1 connected, the selected interface takes precedence. ❒ If Delivery Option is set to [On], check that IPv4 Address is set. Reference p.48 "Interface Settings" p.55 "File Transfer" Settings Required to Use Network TWAIN Scanner This section lists the settings required for using TWAIN Scanner under the network environment. Ethernet This section lists the settings required for using network TWAIN Scanner with Ethernet cable. For details about how to specify the settings, see "Interface Settings". Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Setting Requirements Necessary As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network LAN Type Interface Settings/Network Ethernet Speed Interface Settings/Network Permit SNMPv3 Communictn. Interface Settings/Network Permit SSL/TLS Comm. Interface Settings/Network Host Name As required As required Necessary Necessary As required As required As required As required Note ❒ For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. 27